Lightweight Wall Tent
The Courthouse is a lightweight wall tent with dual center poles and 31" side walls. Designed with cots in mind, the Courthouse offers a tremendous amount of usable space for the footprint. The side walls mean less wasted space in the edges of the tent compared to a tipi. This shelter will fit 3 full sized cots, a stove and still have room in the front for gear and firewood.
The perfect wall tent for animal packers looking to lighten their load but still have a roomy, storm worthy wall tent. The dual pole design means that a larger portion of the tent has standing room compared to a tipi, making this a great gathering tent for larger groups
The sod skirt is larger then on our tipi tents and is made from our burly 40d floor fabric. The rear vent features a large flap that can be tied out for airflow or tied down for weathering storms or retaining more heat. This tent features screen doors that can be tied back or left closed independently of the main doors.
We recommend 9ft of stovepipe for this wall tent.
- Full height front door
- large covered rear vent
- Full front screen coverage
- 6" sod skirt for sealing out drafts
- Stove jack
- Sewn in screen doors
- Footprint measures 11' 4" by 9' 6" rectangle. Doors angle out to 13'4" center dimensions.
- Center height is 8 ft (7'11" - 8'2")
- Side walls are 31"
- Floor space is approximately 126 square feet
- Total weight including canopy, 30 stakes, 100ft of guyline, and two aluminum center poles is approximately 12.5 lbs
- 30D Cordura Spec Ripstop Double Coated Silnylon with waterproof rating of 3000-4000 mm hydrostatic head
- Sewn in screen doors
- Stove jack with rain flap
- 30 Stakes
- 100 ft Reflective guyline
- 2 Poles
- Stuff sacks
- Enough seam sealer to seal the shelter (If you pay us to seal it it will not come with sealer)
For best results we recommend seam-sealing your tent. You can do it at home or have us do it for you (adds 2-3 weeks)(if we seal the shelter it will be shipped without extra tubes of sealant):
- The Courthouse includes enough seam sealer to seal the entire tipi.
- Seal the outside seams, but do it from the inside - pitching the tipi inside out allows you to reach all of the seams.
- The easy way to seal is to run a thin bead of sealant along the seam, then press it in with a finger, wiping the excess on a paper towel.
- Alternatively, you can use an acid brush from a hardware store to spread the sealant.